An open-source 16-key macropad with three rotary encoders, custom firmware, and a companion configuration app.
Studio is the desktop app for the novakey. It can be used to configure profiles and keybinds
The PCB was designed in KiCad. Source files are in kicad_files/.
![]() Top |
![]() Bottom |
| Ref | Qty | Part | Footprint / notes |
|---|---|---|---|
| A1 | 1 | Raspberry Pi Pico | Through-hole (datasheet) |
| U2 | 1 | 0.91" 128x32 I2C OLED (ER-OLEDM0.91-1) | I2C (datasheet) |
| SW1–SW3 | 3 | EC11 rotary encoder with push switch | Alps EC11E, vertical, 20 mm shaft |
| SW4–SW19 | 16 | Kailh MX hotswap socket | MX 1.00u |
| D1–D16 | 16 | Signal diode (e.g. 1N4148) | DO-35 through-hole, 7.62 mm pitch |
| — | 1 | NovaKey PCB | Gerbers in pcbway_production/ |
| Qty | Part | Source |
|---|---|---|
| 16 | MX-style switches | Any MX-compatible switch |
| 16 | 1u keycaps | Any MX-compatible keycaps |
| 3 | Encoder knobs | 3D printed, CAD/Knob.FCStd |
| 1 | Enclosure base | 3D printed, CAD/enclosure_v3/Base_flat.stl |
| 1 | Enclosure top | 3D printed, CAD/enclosure_v3/Upper_flat_base.stl |
The KiCad-exported BOM is in kicad_files/bill_of_materials.csv.





